Arduino WiFi Shield ESP8266


Arduino WiFi Shield ESP8266
Stock Number: 33322 MP
  Be the first to review this item
$9.95
$5.95 
This item is discontinued & is not being restocked.


This item is NO LONGER available. Please use our SEARCH feature and see if you can find an alternate item for what you were looking for.
This item is no longer available


SHARE
    
     Email this to a friend     

Detailed Description

Arduino WiFi shield board using industrial-grade, shielded ESP8266 module for ESP - 13 .
Pin-compatible with Arduino UNO, Mega
Arduino Pinout 2/3/4/5/6/7/8/9/10/11/12/13;
ESP8266 GPIO Pinout 0/2/4/5/9/10/12/13/14/15/16 / ADC / EN / * UART TX / UART RX;
Can be used as an stand alone ESP8266 development board.
download the official firmware the AT command, NodeMCU open-source firmware, etc;
Features:
Support wireless 802.11 b/g/n standard.
Transmission rate: 110-460800 BPS.
Support the STA/AP two working mode;
Built-in TCP/IP protocol stack, (configurable socket);
Support the standard TCP/UDP Server and Client;
Serial port baud rate support: 1200/2400/4800/9600/19200/38400/57600/74800/ 115200 bps.
Selectable Serial port data bits: 5/6/7/8;
Parity bit: None
Stop bit: 1 or 2;
RESET button;
KEY buttons mode configurationn.
Dual-Ports: DIP switches: select Arduino and ESP8266
Current: ~70 ma (200ma Max), < 200 ua standby.
L: 2-3/4" W: 2" HT: 3/4" WT: .06


California Proposition 65 Warning WARNING: This product can expose you to chemicals including Nickel which is known to the State of California to cause cancer and which is known to the State of California to cause birth defects and/or other reproductive harm. For more information, go to www.P65Warnings.ca.gov



Recently Viewed Items